Gutter Installation How To DIY

---

This is a how-to guide for DIYers needing gutters installed on their home.
This is for store-bought gutters only. Seamless gutters require a gutter machine.
If you wish to have seamless gutters it is recommended to get a quote and hire a trusted local gutter installer. Gutter Installation and Gutter Replacement  It's important to understand that not all gutters are created equal.
If you find that you can't complete this job under safe conditions or with the proper equipment you should call a professional. Sometimes we underestimate the job-at-hand and get in over our heads.
Make sure to plan out what your goal and strategy is beforehand. You should have a mental checklist of how long this will take, what supplies you need, how many hangers per how many feet the gutter run will be, etc.
Aluminum gutter is sharp - make sure to wear gloves and other safety gear when necessary. First, A Few Tools Are Needed: Ladder Power drill Hangers w/ screws Gutter channel and downspouts Waterproof sealant Downspout bands Drain trough Now that you're ready, let's begin: If you are replacing your existing gutters you need to remove them Cut old sealant between gutter channel and downspout Remove downspout bands and screws Lay downspout aside or discard Reverse the hanger screws on the entire gutter channel With recruited help, lower the old gutter down Installing new gutters: With help, raise new gutter up to roof fascia Start opposite of downspout end with hangers Fasten a new hanger every 6 feet ensuring proper pitch You'll want approximately a 1 inch drop from end to end Grab your downspout, sealant and downspout bands Attach the downspout to the gutter flange ensuring fitment has exceeded 2 inches Use sealant to evenly make a water-tight seal Screw both together on either side for more structural integrity if needed Install drain pad splash block under gutter downspout drain mouth Run water hose for a few minutes to make certain the gutter system drains and sheds rainwater properly (adjust pitch if necessary) Note: The longer the channel run, the more the drop When you are all finished and think you have it completed, measure your pitch from the roof to the gutter lip or from the bottom of the fascia to the bottom of the gutter trough and check difference compared to the other end.
Have a look around and see if you have all the hangers buttoned up and screwed in all the way. Check if the endcaps need sealant or come preinstalled.
Make sure you've coated the joint between the downspout and the gutter flange evenly with sealant. Fasten any screws you've forgotten.
Hopefully, if you've taken enough time and consideration, you've completed these steps without too many obstacles. Wait for your first rain and take a glance outside to notice the new handy-work now making your home complete and saving yourself from the hassle of water damages and rain trenches. Take a few steps back and enjoy the sight of your new gutter system.
Be proud you didn't need to call or hire a professional.   Source: Free Articles from ArticlesFactory.com I grew up in the rural suburbs of Arkansas enjoying a pleasant childhood with my family.
I've attended church my whole life and am strong in my faith. Today I am starting a family of my own and enjoy spending time with them.
As I work to provide for a better future I am drawn to help others along the way in my different business fields. Some of my many hobbies and past-times include fishing, hunting, collecting guns, building fast cars and off-road trucks, water sports, weight-lifting and entrepreneurship.
I'm always dedicated to helping others around me achieve what makes them happy. Giving is living.
Thank you for listening to what I have to say. God bless you!  .